-  General purpose toolholder having lever type
      locking for inserts with central hole

   -  Standard sizes available for cutting edge heights
      of 16 mm and above

   -  High indexable accuracy due to compact insert
      seating at -  6⁰ x  -  6⁰

   -  Wide range of inserts available in shapes of
       Square, Triangle, Diamond, Round etc.

  -  Finger type clamping for both +ve and -ve inserts

  -  Sturdy in design and simple to operate

  -  Universally applicable clamp design for indexable
      inserts with adjustable chipbreakers

  -  Low spare parts cost

  -  For +ve insert normal rake = +6⁰, inclination = 0⁰

  -   For -ve insert normal rake = -6⁰, inclination = -6⁰

  -  Insert holding  mechanism is combination of lock
     pin type and clamp on type

  -  Seating of insert at -6⁰ x -6⁰

  -  Contouring upto 65⁰ included angle possible

  -  Securing force of insert is strong, excelling in copy
     turning and interrupted cutting

  -  Screw type clamping for +ve inserts with central
      hole

  -  Small shank size holders with cutting edge height
     as low as 6 mm, suitable for machining small
     components

  -  Toolholder that needs only one spare part

  -  Seating of insert at 0⁰